How to maintain your hot tub shinny
Hot tub repair pro company in Colorado: Replace your insulated doors with screened louvered doors, which permit the shell and water to cool more quickly and also vents the heat from the running motors. (We do not advise leaving the doors open or off. The inside of a spa is not a safe place for children or pets, and you don’t want insects and rodents to get in).
Here are several tips on how to maintain your hot tub and also a suggestion if you live in Colorado. Always shower first with soap and water to reduce the likelihood of contaminating the spa water and minimizing health risks. Lotions, oils, and other things contribute to build-up in your spa. In cold climates, it’s not advisable to drain it — so save yourself the extra cost of a possible repair bill by rinsing off before and after. Besides: isn’t it nice to get into a really clean tub? Limit your soak time to no more than 15 to 20 minutes at a time. Cool off, then re-enter if you like.
Advices for purchasing a hot tub : Reclined seating lets you lay back, fully submerged in spa water. Loungers usually have more jets for a full-body massage. The best spas are deep enough to prevent you from floating out of the lounger. A lounge takes the equivalent space of up two standard seats. Tubs for families or friends the need more seats could skip the lounger for an extra spot.
When hot tub DIY meets TLC, the result is much more than an improperly formatted Roman numeral. You can vacuum grit, gunk, and small debris from your spa with ease once you’ve put together this simple siphon vacuum. One of the most overlooked areas of proper hot tub care is treating your hot tub cover right. Exposed as they are to constant heat and moisture, hot tub covers can develop a musty or mildewy smell if they’re not cleaned properly. You can keep the funk away by using a simple bleach solution to clean your hot tub cover. In a spray bottle, combine nine parts water to one part bleach, and use it to clean the underside of your hot tub cover every 90 days.
Speaking of regular spa care, a full cleaning of the waterline and surfaces can be done when the spa is drained, which should happen every 2-4 months. Just be sure not to use any old household cleaner or soap. If you are going to use any chemical on your spa surfaces, use something like our Spa Cleaner to keep out phosphates, nitrates and who knows what else. See extra information at https://drspallc.com/.
But first let’s see the hot tub choice of the month : Bullfrog Spas’ unique JetPak Therapy System lets you customize your massage with 18 options that each target a different type of massage therapy. Though most hot tubs offer some degree of customization when it comes to color options and even upgradable features, Bullfrog Spas lets you pick exactly what kind of jets and massage therapy to put in each seat. The interchangeable JetPaks, available for most models of Bullfrog Spas, give you sixteen seat back options for each seat in your spa that require less tubing and are more energy efficient than many spas on the market. Though Bullfrog does sell hot tub models without the JetPak system, the interchangeable jets and customization options are really the big selling point of this brand. Aside from the pre-set models, Bullfrog also allows you to design your own completely custom spa, as well.
Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water. This spa care tip is so often forgotten. However, if the skimmer starts to suck air, it could possibly damage the pump. The water level should be in the middle of the skimmer intake or a little higher. You don’t want it too high, and you never want to overflow the spa, so keep a close eye on the water level while filling.